Industrial vacuum pumps manufactured by Depule
Oil-free rotary vane vacuum pumps, pumping speed coverage 3.4 to 45 m³/h; single-stage oil-sealed rotary vane, two-stage oil-sealed rotary vane and Roots vacuum pumps can be supplied as project-matched units.
Full product range
Oil-free rotary vane vacuum pumps, selected by pumping speed, ultimate vacuum and process medium
V3 Single-stage Oil-free Rotary Vane Vacuum Pump
3.4 / 4.2 m³/h, 0.18 kW single phase, 90 kPa ultimate pressure, oil-free, for small holding and laboratory duty.
V8 Single-stage Oil-free Rotary Vane Vacuum Pump
6.8 / 8.6 m³/h, 0.28 kW single phase, G3/8" ports, oil-free rotary vane.
V10 Single-stage Oil-free Rotary Vane Vacuum Pump
10 / 12 m³/h, 0.4 kW single phase, G1/2" ports, 15 kg.
V16 Single-stage Oil-free Rotary Vane Vacuum Pump
16 / 18.2 m³/h, 0.55 kW, single or three phase, G1/2" ports.
V15/25/40H Single-stage Oil-free Rotary Vane Vacuum Pump
40 / 45 m³/h, 1.3 kW oil-free rotary vane, several frame and port combinations.
V25/40 Single-stage Oil-free Rotary Vane Vacuum Pump (single suction)
40 / 45 m³/h, 1.3 kW, single suction, G3/4" inlet.
V15L Single-stage Oil-free Rotary Vane Vacuum Pump
L-series model; capacity and ports confirmed per order.
V25L Single-stage Oil-free Rotary Vane Vacuum Pump
L-series model, built to order, data per drawing.
V40L Single-stage Oil-free Rotary Vane Vacuum Pump
L-series model, built to order, data per drawing.
V0025A - V0100 Single-stage Oil-sealed Rotary Vane Vacuum Pump
20 - 110 m³/h, 0.75 - 3.0 kW, ultimate vacuum 0.1 mbar (0.5 mbar on V0025A), oil-sealed single stage.
V0155 Single-stage Oil-sealed Rotary Vane Vacuum Pump
150 / 175 m³/h, 4.0 kW, ultimate vacuum 0.3 mbar, G2" ports.
V0160 - V0302 Single-stage Oil-sealed Rotary Vane Vacuum Pump
160 - 340 m³/h, 4 - 7.5 kW, ultimate vacuum 0.08 - 0.5 mbar, G2" ports.
V0630B Single-stage Oil-sealed Rotary Vane Vacuum Pump
630 m³/h at 50 Hz, 15 kW, DN100 inlet, three gas ballast pressure levels.
2V80 / 2V275 Two-stage Oil-sealed Rotary Vane Vacuum Pump
74 / 255 m³/h, ultimate vacuum 4×10⁻⁴ - 5×10⁻⁴ mbar, two stages in series.
LC Series Roots Vacuum Pumps (LC250 - LC4200)
250 - 4200 m³/h, two non-contacting lobes, used with a backing pump.
Vacuum Pump Units (Packaged Systems)
Pump, buffer tank, valves, filtration and controls supplied as one unit.
Central Vacuum Systems and Vacuum Stations
One set of pumps serving many points, with piping, receiver and interlocked control.
Industries
Matching models to the vacuum level, pumping speed and gas of each process
Semiconductor and electronics
Wafer and substrate holding, component placement, inspection stations.
Vacuum coating and surface treatment
Chamber roughing, fixture holding, pre-coating cleaning and exhaust support.
Vacuum heat treatment and metallurgy
Furnace roughing, vacuum drying, degassing and impregnation.
Vacuum packaging and handling
Packaging draw-down, suction cup handling, bag opening and forming stations.
Food and pharmaceutical
Packaging, degassing, powder conveying and clean stations.
Chemical processing and distillation
Vacuum distillation, filtration, degassing and solvent recovery.
Central vacuum system integration
Multi-station central vacuum, receivers and piping.
Why Depule
Every unit is selected on published figures and configured to the duty, with each technical condition checked before delivery.
Sized on duty
Pumping speed, ultimate pressure, gas handled, dust and corrosion, duty cycle and power supply are confirmed before a model is proposed.
Range covered
Externally supplied models have pumping speeds of 3.4 to 45 m³/h; small and medium-to-large single-stage oil-free rotary vane pumps each have corresponding models.
Figures from the datasheet
Pumping speed, motor power, ultimate pressure, weight and dimensions are quoted as published, not estimated.
News
Product releases, technical notes and industry information
Need a model recommendation or a quote?
Tell us the required pumping speed, ultimate pressure, gas handled, dust and corrosion conditions, duty cycle and power supply; we will size the model for your process.
Contact us